Operate elevating work platform
Scissor lifts, vertical mast lifts and boom-type platforms under 11 m
This unit is built but has not passed the sale gate, so it is not for sale and nothing here can be bought yet. The gate is the QA checker exiting clean and a validation record signed by a TAE-qualified assessor — both, every time, with no way to skip either.
What is actually in it.
One section of the learner manual, one theory question, three of the 18 observables and three rows of the mapping matrix. Every word is lifted straight out of the pack.
S3 Assess the ground before you set up
- Most EWP overturns start at the ground, not in the air.
- Check for backfilled trenches, service pits, soft edges and slope.
- Outriggers go onto spreader plates sized for the load, not straight onto the surface.
- Wind speed limits are on the machine's data plate — check them before you elevate.
EWP outrigger foot seated on a steel spreader plate on gravel, close, showing the bearing area
One theory question
A scissor lift data plate reads: platform capacity 240 kg, maximum 2 persons. Two operators weigh 95 kg and 88 kg. Their tools and material weigh 46 kg. Can they proceed? Show your working.
The benchmark answer is in document 07 and never leaves it.
Three of the 18 observables · T2 Set up and operate
- Completes the pre-operational check to the manufacturer's list
- Assesses ground conditions and positions the machine for stability
- Deploys stabilisers or outriggers onto adequate bearing
How the mapping is proved
Nobody types the matrix. Every block in the pack names the performance criteria, performance evidence and knowledge evidence it addresses, and the matrix is computed from those names at build time — 45 requirements, 33 taught, 33 assessed, 12 gaps. A requirement with nothing pointing at it cannot be hidden, because nobody wrote this table.
| Ref | Taught in | Assessed by |
|---|---|---|
| PC 1.2 | S12 | T1 |
| KE-1 | S1 S11 | Q1 |
| PC 1.1 | S12 | Q1 T1 |
Three of 45 rows. The full matrix is document 03.
Eight documents.
Learner manual
Every section names the performance criteria it addresses.
Trainer presentation
On the TronWick template, rendered from the same source as the manual.
Mapping matrix
Computed from the pack, not typed.
Theory assessment — candidate
The questions, without the benchmark answers.
Theory marking guide — assessor
The same paper with one benchmark answer per question.
Practical assessment — candidate
Tasks, conditions and the machine capture sheet.
Practical observation guide — assessor
The same tasks with the observable actions as a tick list.
Licence and conditions of use
Licensing position, exclusions, what you must complete before delivery, and your licence terms.
Operators on civil, mining and construction sites. 1 day theory and practical, plus two assessed occasions.
Registered training organisations with this unit on scope can deliver it and assess against it — the pack is your evidence for the assessment conditions, and the mapping is already computed. Businesses training their own people can licence it too: most of a pack is the part you would have written yourself. You cannot issue a Statement of Attainment for it, and nothing in the pack claims you can.
$199.00 + GST when it lands.
Or $239.99 including GST with your branding on it. One organisation, unlimited internal delivery, no end date and nothing recurring.